Cart Contents

Cart


Measuring Tools » Inclinometers »

Dual Axis Inclinometer

SKU
ANFGSRHM1000B

$1045.00 inc GST


  Login to create Wishlists

Calculate Postage

Slope & Level Alarm System for Earthmoving - Mining - Barges - Piling - Cranes - Farming - Civil Construction
A dual axis inclinometer or dual axis slope indicator will assist to help protect both people and equipment.

Industrial, mining, civil, defence, transport and machinery hire industries continue to battle with safety, not only for the operators of their equipment but also their machinery.

       The Dual Axis Pitch and Roll Inclinometer allows customisation of sensor response times to allow maximum flexibility in various applications. An industrial adjustable mount allows for optimum positioning for the operator. Both pitch and roll can simultaneously be displayed and can optionally be made to invert in the event of an alarm or warning condition.
        The display is highly visible both at night and in sunlight due to the use of an industrially rated transflective graphics LCD display. The integrated keypad allows for customisation of the display, in application calibration, warning and alarm setup, minimum and maximum tilt display and sensor customisation.
    One HM1000B 2-axis high-accuracy RS485 tilt sensor is included, with a 15m cable length. When used in combination with the Inclinometer (Slope Meter), accuracy of one degree and customisable frequency response are achievable.
    Integrated alarm and warning relays provide normally open, normally closed and common outputs. Both warnings and alarms can be configured to be normally-on or normally-off. Optional password protection on the setup menu can be configured by the user.
                                 The Inclinometer (Slope Meter) is in a rugged ABS plastic enclosure with a polycarbonate fascia. A fully adjustable RAM 25mm ball mount can be screw mounted to the vehicle, or optional suction mounts are available. Power, outputs and the sensor are connected through a Deutsch DT12 socket at the rear of the unit. The wiring loom is made from flame-retardant Exane wire.

Features

  • 9V to 36V supply voltage
  • Adjustable industrial mount
  • Highly visible pitch and roll readout
  • Graphical mode
  • Configurable numeric or graphical display
  • Remote Sensor
  • Adjustable backlight
  • Integrated user interface for customisation
  • One degree accurate, variable frequency response sensors
  • Highly configurable warning and alarm functions
  • Integrated warning and alarm relays
  • Integrated buzzer
Specifications
Input voltage Minimum 9V; maximum 36V
Power consumption 2W (165mA @ 12V) – includes dual axis tilt sensor
Warning relay output Normally open or normally closed, 36V max, 1A max, internally fused
Alarm relay output Normally open or normally closed, 36V max, 1A max, internally fused
Maximum tilt -90 to 90°, recommended use -60 to 60°
Accuracy 1° from 0 to 30°, 2° from 30-60°
Refresh rate 10 updates per second
Frequency response 10Hz to 0.1Hz, user settable
Communications protocol Enhanced RS485 differential, will operate with one broken connection
Environmental Specifications
Operating temperature -40°C to +85°C
Humidity 5% to 95% relative humidity
Physical Characteristics
Tilt Sensor dimensions 57mm (base width), 82mm (w), 51mm (h), 32mm (d), cable 15m
Wiring loom dimensions 50cm

 

          
Wiring loom included Side view showing wiring loom & ball mount Dual Axis sensor

Dual Axis Inclinometer pdf brochure 

 


Browse Our Categories


View Cart